Skip to content

Unlaunchのインストール

WARNING

If you do not have access to a PC, or if your PC is running ChromeOS, then please do not install Unlaunch. A PC (running Windows, Linux, or macOS) is required in order to fix some issues that may occur after installing Unlaunch.

DANGER

If you have not yet done so, please follow Dumping NAND. 可能性は僅かながら、Unlaunchの事故でDSiをブリックすることがあります。 A NAND backup + hardmod would allow you to restore this backup, provided you know how to solder.

WARNING

この手順を実行するときは、本体が十分に充電されていることを確認してください。 作業中に電池切れを起こすと本体に深刻なダメージを与える可能性があります。

WARNING

UnlaunchにはニンテンドーDSi開発機との互換性はありません。

セクション I - SD カードのセットアップ

  1. Download the latest version of Unlaunch
  2. Extract UNLAUNCH.DSI from the unlaunch.zip archive and place it anywhere on your SD card
  3. SDカードにTWiLight Menu++が残っていることを確認します

セクション II - Unlaunchのインストール・更新

  1. TWiLight Menu++を起動します
    • If this is your first time installing Unlaunch, relaunch TWiLight Menu++ through the exploit that you used
    • If you have already installed Unlaunch and are looking to update it, hold A + B while booting and select the option labeled TWiLight Menu++
    • If several options are labeled TWiLight Menu++, select the option in where BOOT.NDS is shown at the end of the path on the bottom screen
      • This happens because you are running an older version of TWiLight Menu++, unless you're doing it on purpose, is suggested that you update your installation
  2. TWiLight Menu++設定を起動します
    • If you haven't changed your theme, press SELECT and touch the small DS icon on the bottom of the touch screen. それ以外の場合は、TWiLight Menu++ Manualを参照してください
  3. Hit L / R or X / Y until you reach the Unlaunch settings page
  4. If you want to change Unlaunch's background image, select Background and choose the one you want
  5. TWiLight Menu++設定を終了します
  6. In the file navigation menu, launch Unlaunch DSi Installer
    • If you see two black screens after launching, download GodMode9i, put its .dsi file on the SD root, then launch GodMode9i using TWiLight Menu++, and start Unlaunch.dsi
      This method does not enable Unlaunch to use custom patches and background
  7. Select the "install now" option
    • If Unlaunch freezes at ERROR: MISMATCH IN FAT COPIES, please take a look at the Troubleshooting page
  8. 完了したら、本体を再起動します

If you see Unlaunch's Filemenu screen at this point, you have successfully modded your Nintendo DSi.

セクション III - Unlaunchインストール後の設定

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed launch whatever you want.

  1. ABを押したままDSiの電源を入れます
    • これはUnlaunchのファイルメニューを開くホットキーです
    • If nothing is listed, or if only TWiLight Menu++ isn't listed (even after scrolling down), then you'll need to reformat the SD card
  2. Navigate to OPTIONS, and look at the available options
    • A + BはUnlaunchメニューを起動するためにハードコードされているため変更はできません
    • The NO BUTTON and BUTTON A / B / X / Y options can be set however you like and will choose what your DSi loads at boot depending on which buttons are held. DSiウェアも、Homebrewも、Slot-1ゲームカードも、wifibootも、UnlaunchのFilemenuも選べます
      • For TWiLight Menu++, select TWiLight Menu++
      • For the original DSi Menu, select Launcher
    • LOAD ERROR is what your DSi will load if loading what you have set fails, such as the SD card not being inserted
  3. Select SAVE & EXIT to save your settings, then turn off your DSi

セクション IV - SDカードのクリーンアップ

TIP

This section is optional and only serves for keeping your SD card tidy of files you won't need.

  • Delete the sd:/private/ds/app/484E494A/pit.bin file from your SD card
  • Rename tip.bin back to pit.bin, and leave it intact
  • You can now restore the DCIM folder that was on the root of your SD card
  • Delete the UNLAUNCH.DSI file from your SD card
  • Delete the 800031_104784BAB6B57_000.ppm and T00031_1038C2A757B77_000.ppm files from inside the following folders:
    • sd:/private/ds/app/4B47554A/001 (Japan)
    • sd:/private/ds/app/4B475545/001 (USA)
    • sd:/private/ds/app/4B475556/001 (Europe/Australia)
    • 自分の地域以外のフォルダを丸ごと削除してもOKです
  • Delete the UNLAUNCH.DSI file from your SD card