Instalar Unlaunch

You are about to install Unlaunch, a permanent bootcode exploit which gets installed onto the DSi console itself, allowing full control of the console on boot, and as a result, allows homebrew applications full access to the hardware without restrictions from DSi system apps or DSiWare titles.

DANGER

If you have not yet done so, please follow Dumping NAND. A NAND backup + ntrboot (or a hardmod, provided you know how to solder) would allow you to restore this backup in case the console gets bricked afterwards.

DANGER

Installing or uninstalling Unlaunch, while safe, writes to the console's NAND, so there's a small chance to brick your console!

WARNING

Si no tienes acceso a una PC, o si el sistema operativo de tu PC es ChromeOS, no instales Unlaunch. A PC (running Windows, Linux, or macOS) is required to ensure the SD Card used is formatted in a way compatible with Unlaunch.

WARNING

Unlaunch no es compatible con consolas de desarrollo de Nintendo DSi.

Sección I - Configuración de la tarjeta SD

1. Download the latest version of Safe Unlaunch installer
2. Place unlaunch-installer.dsi anywhere on your SD card

Sección II - Actualizar la versión del sistema DSi

TIP

If Unlaunch is already installed and you are looking to update or uninstall Unlaunch, skip to Section III

1. In the DSi Menu, launch the System Settings application (the icon is gray and has a white wrench)
   • The version will be shown on the bottom-right of the top screen
   • If the version is Ver 1.4.2, proceed with performing a system update
   • If the version is not Ver 1.4.2, go straight to Section III
2. Touch the number 4 to go to the fourth page
3. Toque System Update
   • It is the third option if your console isn't in your native language
4. Touch Yes when asked to connect to the internet and update
   • It is the left-side option if your console isn't in your native language
   • If the version is already up to date, go straight to Section III
5. Toque el botón Siguiente
   • It is the right-side option if your console isn't in your native language
6. Toque el botón Acepto
   • It is the top option if your console isn't in your native language
7. Toque el botón OK
   • It is the bottom right-side option if your console isn't in your native language
8. Wait for the system to update, and reboot when finished

Section III - Installing/Updating Unlaunch

1. Open the menu you have installed (TWiLight Menu++ or AKMenu-Next)
   • If this is your first time installing Unlaunch, relaunch the menu through the exploit that you used
   • If you have already installed Unlaunch and are looking to update it, hold A + B while booting
2. In the menu where the icons are listed, launch Safe Unlaunch installer (listed as unlaunch-installer.dsi depending on which menu is used and/or how it's displayed)
3. Press the A button after the WARNING message appears
   • If the battery LED is red, it'll tell you to plug in the console. Selecciona Sí para continuar después de conectarlo
4. If you want to change the default background, select [Custom background] and press A to select the one you want to use
   • Three custom backgrounds are included, but you can add more into a folder called backgrounds on the SD card root (create the folder if it doesn't exist)
5. If you want to keep both the DSi splash (with health and safety message) and the sound in the DSi system menu, select Enable sound and splash and press A to turn it on
6. If Unlaunch is already installed, select the Uninstall unlaunch or Restore launcher tmd option, and press A once it's done
   • If you only want to uninstall Unlaunch, you can stop here
7. Select the Install unlaunch option, and press the A button
8. Pulsa el botón A una vez finalizada la instalación
9. Presiona POWER para reiniciar tu sistema

Si en este punto ves el sistema de archivos de Unlaunch, significa que has modificado exitosamente tu Nintendo DSi.

• If you see a black screen, please take a look at the Troubleshooting page

Section IV - Post-Unlaunch configuration

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed to launch whatever you want.

1. Enciende tu consola manteniendo pulsado A y B.
   • Esto debería iniciar el sistema de archivos de Unlaunch.
   • If nothing is listed, or if only the NAND contents are listed (even after scrolling down), then you'll need to reformat the SD card
2. Navega a OPTIONS, y mira las opciones disponibles
   • La opción A + B está configurada para inciar el sistema de archivos de Unlaunch. Esta opción está bloqueada y no puede ser cambiada.
   • The NO BUTTON (Which autoboots) and BUTTON A / B / X / Y options can be set however you like and will choose what your DSi loads at boot depending on which buttons are held. You can select any DSiWare, homebrew (including whichever menu you installed), the Slot-1 card, wifiboot, or Unlaunch's Filemenu
     • For the original DSi Menu, select Launcher
     • For TWiLight Menu++, select TWiLight Menu++ (Listed as sdmc:/BOOT.NDS on the bottom screen)
     • For AKMenu-Next, select AKMenu-Next (Listed as sdmc:/akmenu-next.dsi on the bottom screen)
     • For hiyaCFW, select hiyaCFW (Listed as sdmc:/hiya.dsi on the bottom screen)
   • LOAD ERROR is what your DSi will load if loading what you have set fails, such as the SD card not being inserted
3. Select SAVE & EXIT to save your settings, then turn off your DSi

Sección V - Limpiando la tarjeta SD

TIP

Esta sección es opcional y solo sirve para mantener ordenada la tarjeta SD y remover archivos que no necesites.

Memory Pit

• Elimina el archivo sd:/private/ds/app/484E494A/pit.bin de tu tarjeta SD
• Renombra tip.bin de vuelta a pit.bin, y dejarlo intacto
• You can now restore the DCIM folder that was on the root of your SD card
• Elimina el archivo unlaunch-installer.dsi de tu tarjeta SD

Flipnote Lenny

• Elimina los archivos 800031_104784BAB6B57_000.pm y T00031_1038C2A757B77_000.ppm de dentro de las siguientes carpetas:
  • sd:/private/ds/app/4B47554A/001 (Japón)
  • sd:/private/ds/app/4B475545/001 (USA)
  • sd:/private/ds/app/4B475556/001 (Europa/Australia)
  • También puedes eliminar las carpetas de otras regiones que no sean la tuya
• Elimina el archivo unlaunch-installer.dsi de tu tarjeta SD