Instalacja Unlaunch

You are about to install Unlaunch, a permanent bootcode exploit which gets installed onto the DSi console itself, allowing full control of the console on boot, and as a result, allows homebrew applications full access to the hardware without restrictions from DSi system apps or DSiWare titles.

DANGER

Jeżeli nadal jeszcze tego nie zrobiłeś, proszę Zrzuć NAND. A NAND backup + ntrboot (or a hardmod, provided you know how to solder) would allow you to restore this backup in case the console gets bricked afterwards.

DANGER

Installing or uninstalling Unlaunch, while safe, writes to the console's NAND, so there's a small chance to brick your console!

WARNING

Jeżeli nie masz dostępu do komputera, albo jeżeli twój komputer ma zainstalowany ChromeOS, to proszę nie instaluj Unlaunch. A PC (running Windows, Linux, or macOS) is required to ensure the SD Card used is formatted in a way compatible with Unlaunch.

WARNING

Unlaunch nie jest kompatybilny z konsolami deweloperskimi Nintendo DSi.

Sekcja I - Konfiguracja karty SD

1. Download the latest version of Safe Unlaunch installer
2. Place unlaunch-installer.dsi anywhere on your SD card

Section II - Updating DSi system version

TIP

If Unlaunch is already installed and you are looking to update or uninstall Unlaunch, skip to Section III

1. In the DSi Menu, launch the System Settings application (the icon is gray and has a white wrench)
   • The version will be shown on the bottom-right of the top screen
   • If the version is Ver 1.4.2, proceed with performing a system update
   • If the version is not Ver 1.4.2, go straight to Section III
2. Touch the number 4 to go to the fourth page
3. Touch System Update
   • It is the third option if your console isn't in your native language
4. Touch Yes when asked to connect to the internet and update
   • It is the left-side option if your console isn't in your native language
   • If the version is already up to date, go straight to Section III
5. Touch the Next button
   • It is the right-side option if your console isn't in your native language
6. Touch the I Accept button
   • It is the top option if your console isn't in your native language
7. Touch the OK button
   • It is the bottom right-side option if your console isn't in your native language
8. Wait for the system to update, and reboot when finished

Section III - Installing/Updating Unlaunch

1. Open the menu you have installed (TWiLight Menu++ or AKMenu-Next)
   • If this is your first time installing Unlaunch, relaunch the menu through the exploit that you used
   • If you have already installed Unlaunch and are looking to update it, hold A + B while booting
2. In the menu where the icons are listed, launch Safe Unlaunch installer (listed as unlaunch-installer.dsi depending on which menu is used and/or how it's displayed)
3. Press the A button after the WARNING message appears
   • If the battery LED is red, it'll tell you to plug in the console. Select Yes to continue after plugging it in
4. If you want to change the default background, select [Custom background] and press A to select the one you want to use
   • Three custom backgrounds are included, but you can add more into a folder called backgrounds on the SD card root (create the folder if it doesn't exist)
5. If you want to keep both the DSi splash (with health and safety message) and the sound in the DSi system menu, select Enable sound and splash and press A to turn it on
6. If Unlaunch is already installed, select the Uninstall unlaunch or Restore launcher tmd option, and press A once it's done
   • If you only want to uninstall Unlaunch, you can stop here
7. Select the Install unlaunch option, and press the A button
8. Press the A button once installation is done
9. Press POWER to reboot your system

Jeśli w tym momencie zobaczysz manu plików Unlaunch, pomyślnie zmodowałeś Nintendo DSi.

• Jeżeli zobaczysz czarny ekran, proszę zobacz na stronę Rozwiązywanie Problemów

Section IV - Post-Unlaunch configuration

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed to launch whatever you want.

1. Włącz konsolę przytrzymując A i B
   • To powinno uruchomić Unlaunch Filemenu
   • If nothing is listed, or if only the NAND contents are listed (even after scrolling down), then you'll need to reformat the SD card
2. Przejdź do OPTIONS oraz sprawdź dostępne opcje
   • A + B jest zakodowane, aby uruchomić w menu Unlaunch i jako takie nie może być zmienione
   • The NO BUTTON (Which autoboots) and BUTTON A / B / X / Y options can be set however you like and will choose what your DSi loads at boot depending on which buttons are held. You can select any DSiWare, homebrew (including whichever menu you installed), the Slot-1 card, wifiboot, or Unlaunch's Filemenu
     • Dla oryginalnego Menu DSi wybierz Launcher
     • For TWiLight Menu++, select TWiLight Menu++ (Listed as sdmc:/BOOT.NDS on the bottom screen)
     • For AKMenu-Next, select AKMenu-Next (Listed as sdmc:/akmenu-next.dsi on the bottom screen)
     • For hiyaCFW, select hiyaCFW (Listed as sdmc:/hiya.dsi on the bottom screen)
   • Twoje DSi załaduje LOAD ERROR jeżeli ładowanie czegokolwiek co wybrałeś, nie powiedzie się, np. jeśli karta SD nie jest włożona
3. Wybierz SAVE & EXIT aby zapisać swoje ustawienia, po czym wyłącz swoje DSi

Section V - Cleaning up your SD card

TIP

Ta sekcja jest opcjonalna i służy tylko do wyczyszczenia niepotrzebnych plików na karcie SD.

Memory Pit

• Usuń plik sd:/private/ds/app/484E494A/pit.bin ze swojej karty SD
• Zmień nazwę tip.bin z powrotem na pit.bin i nie ruszaj go
• Możesz teraz przywrócić katalog DCIM, który był na początku twojej karty SD
• Delete the unlaunch-installer.dsi file from your SD card

Flipnote Lenny

• Usuń pliki 800031_104784BAB6B57_000.ppm i T00031_1038C2A757B77_000.ppm z następujących katalogów:
  • sd:/private/ds/app/4B47554A/001 (Japonia)
  • sd:/private/ds/app/4B475545/001 (USA)
  • sd:/private/ds/app/4B475556/001 (Europa/Australia)
  • Możesz również usunąć wszystkie foldery dla regionów poza twoim
• Delete the unlaunch-installer.dsi file from your SD card