Installing Unlaunch Standalone

You are about to install Unlaunch, a permanent bootcode exploit which gets installed onto the DSi console itself, allowing full control of the console on boot, and as a result, allows homebrew applications full access to the hardware without restrictions from DSi system apps or DSiWare titles.

DANGER

Jeżeli nadal jeszcze tego nie zrobiłeś, proszę Zrzuć NAND. A NAND backup + ntrboot (or a hardmod, provided you know how to solder) would allow you to restore this backup in case the console gets bricked afterwards.

DANGER

Installing or uninstalling Unlaunch, while safe, writes to the console's NAND, so there's a small chance to brick your console!

WARNING

Jeżeli nie masz dostępu do komputera, albo jeżeli twój komputer ma zainstalowany ChromeOS, to proszę nie instaluj Unlaunch. A PC (running Windows, Linux, or macOS) is required to ensure the SD Card used is formatted in a way compatible with Unlaunch.

WARNING

Unlaunch nie jest kompatybilny z konsolami deweloperskimi Nintendo DSi.

Sekcja I - Konfiguracja karty SD

1. Download the latest version of Safe Unlaunch installer
2. Delete boot.nds from the root of your SD card
3. Place unlaunch-installer.dsi on the root of your SD card
4. Rename unlaunch-installer.dsi to boot.nds

Section II - Updating DSi system version

TIP

If Unlaunch is already installed, skip to Section IV

1. In the DSi Menu, launch the System Settings application (the icon is gray and has a white wrench)
   • The version will be shown on the bottom-right of the top screen
   • If the version is Ver 1.4.2, proceed with performing a system update
   • If the version is not Ver 1.4.2, go straight to Section III
2. Touch the number 4 to go to the fourth page
3. Touch System Update
   • It is the third option if your console isn't in your native language
4. Touch Yes when asked to connect to the internet and update
   • It is the left-side option if your console isn't in your native language
   • If the version is already up to date, go straight to Section III
5. Touch the Next button
   • It is the right-side option if your console isn't in your native language
6. Touch the I Accept button
   • It is the top option if your console isn't in your native language
7. Touch the OK button
   • It is the bottom right-side option if your console isn't in your native language
8. Wait for the system to update, and reboot when finished

Section III - Installing Unlaunch

1. Open the installer by re-running the exploit that you used
2. Press the A button after the WARNING message appears
   • If the battery LED is red, it'll tell you to plug in the console. Select Yes to continue after plugging it in
3. If you want to change the default background, select [Custom background] and press A to select the one you want to use
   • Three custom backgrounds are included, but you can add more into a folder called backgrounds on the SD card root (create the folder if it doesn't exist)
4. If you want to keep both the DSi splash (with health and safety message) and the sound in the DSi system menu, select Enable sound and splash and press A to turn it on
5. If Unlaunch is already installed, select the Uninstall unlaunch or Restore launcher tmd option, and press A once it's done
6. Select the Install unlaunch option, and press the A button
7. Press the A button once installation is done
8. Press POWER to reboot your system

Jeśli w tym momencie zobaczysz manu plików Unlaunch, pomyślnie zmodowałeś Nintendo DSi.

• If you see a black screen or if nothing is listed, please take a look at the Troubleshooting page

Section IV - Post-Unlaunch configuration

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed to boot to the original DSi menu.

1. Włącz konsolę przytrzymując A i B
   • To powinno uruchomić Unlaunch Filemenu
   • If nothing is listed, or if only the NAND contents are listed (even after scrolling down), then you'll need to reformat the SD card
2. Navigate to OPTIONS, and select the NO BUTTON option
3. In the list that follows, select Launcher
4. Wybierz SAVE & EXIT aby zapisać swoje ustawienia, po czym wyłącz swoje DSi

Section V - Cleaning up your SD card

TIP

Ta sekcja jest opcjonalna i służy tylko do wyczyszczenia niepotrzebnych plików na karcie SD.

Memory Pit

• Usuń plik sd:/private/ds/app/484E494A/pit.bin ze swojej karty SD
• Zmień nazwę tip.bin z powrotem na pit.bin i nie ruszaj go
• Możesz teraz przywrócić katalog DCIM, który był na początku twojej karty SD
• Delete the boot.nds file from your SD card

Flipnote Lenny

• Usuń pliki 800031_104784BAB6B57_000.ppm i T00031_1038C2A757B77_000.ppm z następujących katalogów:
  • sd:/private/ds/app/4B47554A/001 (Japonia)
  • sd:/private/ds/app/4B475545/001 (USA)
  • sd:/private/ds/app/4B475556/001 (Europa/Australia)
  • Możesz również usunąć wszystkie foldery dla regionów poza twoim
• Delete the unlaunch-installer.dsi file from your SD card