Installing Unlaunch Standalone

You are about to install Unlaunch, a permanent bootcode exploit which gets installed onto the DSi console itself, allowing full control of the console on boot, and as a result, allows homebrew applications full access to the hardware without restrictions from DSi system apps or DSiWare titles.

DANGER

Se ainda não o fez, por favor, siga as etapas na página Extraindo a NAND). A NAND backup + ntrboot (or a hardmod, provided you know how to solder) would allow you to restore this backup in case the console gets bricked afterwards.

DANGER

Installing or uninstalling Unlaunch, while safe, writes to the console's NAND, so there's a small chance to brick your console!

WARNING

Caso você não tenha acesso a um PC, ou se o seu PC está rodando o ChromeOS, por favor, não instale o Unlaunch. A PC (running Windows, Linux, or macOS) is required to ensure the SD Card used is formatted in a way compatible with Unlaunch.

WARNING

O Unlaunch não é compatível com consoles de desenvolvimento do Nintendo DSi.

Seção I - Configuração do cartão SD

1. Download the latest version of Safe Unlaunch installer
2. Delete boot.nds from the root of your SD card
3. Place unlaunch-installer.dsi on the root of your SD card
4. Rename unlaunch-installer.dsi to boot.nds

Section II - Updating DSi system version

TIP

If Unlaunch is already installed, skip to Section IV

1. In the DSi Menu, launch the System Settings application (the icon is gray and has a white wrench)
   • The version will be shown on the bottom-right of the top screen
   • If the version is Ver 1.4.2, proceed with performing a system update
   • If the version is not Ver 1.4.2, go straight to Section III
2. Touch the number 4 to go to the fourth page
3. Touch System Update
   • It is the third option if your console isn't in your native language
4. Touch Yes when asked to connect to the internet and update
   • It is the left-side option if your console isn't in your native language
   • If the version is already up to date, go straight to Section III
5. Touch the Next button
   • It is the right-side option if your console isn't in your native language
6. Touch the I Accept button
   • It is the top option if your console isn't in your native language
7. Touch the OK button
   • It is the bottom right-side option if your console isn't in your native language
8. Wait for the system to update, and reboot when finished

Section III - Installing Unlaunch

1. Open the installer by re-running the exploit that you used
2. Press the A button after the WARNING message appears
   • If the battery LED is red, it'll tell you to plug in the console. Select Yes to continue after plugging it in
3. If you want to change the default background, select [Custom background] and press A to select the one you want to use
   • Three custom backgrounds are included, but you can add more into a folder called backgrounds on the SD card root (create the folder if it doesn't exist)
4. If you want to keep both the DSi splash (with health and safety message) and the sound in the DSi system menu, select Enable sound and splash and press A to turn it on
5. If Unlaunch is already installed, select the Uninstall unlaunch or Restore launcher tmd option, and press A once it's done
6. Select the Install unlaunch option, and press the A button
7. Press the A button once installation is done
8. Press POWER to reboot your system

Se você ver a tela de menu do Unlaunch, então você modificou seu Nintendo DSi com sucesso.

• If you see a black screen or if nothing is listed, please take a look at the Troubleshooting page

Section IV - Post-Unlaunch configuration

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed to boot to the original DSi menu.

1. Ligue o seu console enquanto segura A e B
   • Isto deve iniciar o Menu de Arquivos do Unlaunch
   • If nothing is listed, or if only the NAND contents are listed (even after scrolling down), then you'll need to reformat the SD card
2. Navigate to OPTIONS, and select the NO BUTTON option
3. In the list that follows, select Launcher
4. Selecione SAVE & EXIT para salvar suas configurações e depois desligue o DSi

Section V - Cleaning up your SD card

TIP

Esta seção é opcional e serve apenas para manter o seu cartão SD livre de arquivos que você não precisa.

Memory Pit

• Apague o arquivo sd:/private/ds/app/484E494A/pit.bin do seu cartão SD
• Renomeie tip.bin de volta para pit.bin, e deixe-o intacto
• Agora você pode restaurar a pasta DCIM que estava na raiz do seu cartão SD
• Delete the boot.nds file from your SD card

Flipnote Lenny

• Apague os arquivos 800031_104784BAB6B57_000.ppm e T00031_1038C2A757B77_000.ppm de dentro das seguintes pastas:
  • `sd:/private/ds/app/4B47554A/001 (Japão)
  • `sd:/private/ds/app/4B475545/001 (EUA)
  • `sd:/private/ds/app/4B475556/001 (Europa/Australia)
  • Você também pode excluir as pastas inteiras de regiões além da sua
• Delete the unlaunch-installer.dsi file from your SD card