Installing Unlaunch Standalone

您即將安裝 Unlaunch，這是一種永久性的引導程式碼漏洞，它安裝到 Nintendo DSi 主機本身上，允許在啟動時完全控制主機，因此允許自製應用程式完全存取硬件，而不受 Nintendo DSi 主機軟體或 DSiWare 軟體的限制。

DANGER

如果您尚未執行此操作，請按照匯出系統NAND進行操作。 A NAND backup + ntrboot (or a hardmod, provided you know how to solder) would allow you to restore this backup in case the console gets bricked afterwards.

DANGER

安裝或解除安裝 Unlaunch 雖然安全，會寫入主機的系統NAND，因此有很小的幾率會將主機當機！

WARNING

如果您無法使用電腦，或者您的電腦執行的作業系統是 ChromeOS，請不要安裝 Unlaunch。 需要一台個人電腦（執行 Windows、Linux 或 macOS）來確認所使用的SD卡格式與 Unlaunch 相容。

WARNING

Unlaunch 與 Nintendo DSi 的開發版主機不相容。

第一部分 - SD卡設定

1. Download the latest version of Safe Unlaunch installer
2. Delete boot.nds from the root of your SD card
3. Place unlaunch-installer.dsi on the root of your SD card
4. Rename unlaunch-installer.dsi to boot.nds

Section II - Updating DSi system version

TIP

If Unlaunch is already installed, skip to Section IV

1. In the DSi Menu, launch the System Settings application (the icon is gray and has a white wrench)
   • The version will be shown on the bottom-right of the top screen
   • If the version is Ver 1.4.2, proceed with performing a system update
   • If the version is not Ver 1.4.2, go straight to Section III
2. Touch the number 4 to go to the fourth page
3. Touch System Update
   • It is the third option if your console isn't in your native language
4. Touch Yes when asked to connect to the internet and update
   • It is the left-side option if your console isn't in your native language
   • If the version is already up to date, go straight to Section III
5. Touch the Next button
   • It is the right-side option if your console isn't in your native language
6. Touch the I Accept button
   • It is the top option if your console isn't in your native language
7. Touch the OK button
   • It is the bottom right-side option if your console isn't in your native language
8. Wait for the system to update, and reboot when finished

Section III - Installing Unlaunch

1. Open the installer by re-running the exploit that you used
2. Press the A button after the WARNING message appears
   • If the battery LED is red, it'll tell you to plug in the console. Select Yes to continue after plugging it in
3. If you want to change the default background, select [Custom background] and press A to select the one you want to use
   • Three custom backgrounds are included, but you can add more into a folder called backgrounds on the SD card root (create the folder if it doesn't exist)
4. If you want to keep both the DSi splash (with health and safety message) and the sound in the DSi system menu, select Enable sound and splash and press A to turn it on
5. If Unlaunch is already installed, select the Uninstall unlaunch or Restore launcher tmd option, and press A once it's done
6. Select the Install unlaunch option, and press the A button
7. Press the A button once installation is done
8. Press POWER to reboot your system

If you see Unlaunch's Filemenu screen at this point, you have successfully modded your Nintendo DSi.

• If you see a black screen or if nothing is listed, please take a look at the Troubleshooting page

Section IV - Post-Unlaunch configuration

Currently, Unlaunch defaults to launching its Filemenu on boot, but this can be changed to boot to the original DSi menu.

1. Power on your console while holding A and B
   • This should launch the Unlaunch Filemenu
   • If nothing is listed, or if only the NAND contents are listed (even after scrolling down), then you'll need to reformat the SD card
2. Navigate to OPTIONS, and select the NO BUTTON option
3. In the list that follows, select Launcher
4. Select SAVE & EXIT to save your settings, then turn off your DSi

Section V - Cleaning up your SD card

TIP

This section is optional and only serves for keeping your SD card tidy of files you won't need.

Memory Pit

• Delete the sd:/private/ds/app/484E494A/pit.bin file from your SD card
• Rename tip.bin back to pit.bin, and leave it intact
• You can now restore the DCIM folder that was on the root of your SD card
• Delete the boot.nds file from your SD card

Flipnote Lenny

• Delete the 800031_104784BAB6B57_000.ppm and T00031_1038C2A757B77_000.ppm files from inside the following folders:
  • sd:/private/ds/app/4B47554A/001 (Japan)
  • sd:/private/ds/app/4B475545/001 (USA)
  • sd:/private/ds/app/4B475556/001 (Europe/Australia)
  • You can also delete the entire folders for the regions besides your own
• Delete the unlaunch-installer.dsi file from your SD card